Main Test Cable for Toyota Intelligent Tester IT2 with Suzuki

OBD2 test cable for Toyota IT2, can not works alone, only works together with TOYOTA IT2.

Function:

Connect Toyota IT2 and Car.

Package including:

1pc x Main test cable for Toyota IT2

Price:$25.99 Special Price:$20.99

Consult Diagnostic Interface for Nissan 

Highlights:

1. Language: English
2. Support System: Windows XP
3. Can't update

Consult for Nissan Description:

1.Interface fitting for 14pin Consult Port of Nissan vehicles.
2.Heavy & robust casing for rough service use
3.Connects to PC via RS232
4.Powered from car battery over 14pin Consult Port of Nissan vehicles.
5.LED to control power and clock function

Consult for Nissan Function:

1.Monitor and Log dozens of realtime parameters
2.Check and clear engine fault codes before going to an expensive auto shop
3.Adjust the timing and idle
4.Power balance testing
5.Reset the self-learn codes
6.Control idle air valves, relays (AC, fans, etc), timing
7.Diagnose customer vehicles on-site
8.Speed up troubleshooting of electronically monitored components
9.No software is supplied with this device

Consult for Nissan Specification:

1.Software Include

(Note that some of them are not free and need to be purchased)
DDLreader: DDLreader v.15c / DDLreader v.16c
ConZult
ScanTechNissan
Z-Control
SRTalk v.1.0
ZCSetup v.2.0
ZTalk v.1.1
Nissan Data Scan v.1.4
Nissan Data Scan v.1.51

2.Workable Model

It works on all Nissan cars that have the grey 14pin Consult connector (you'll usually find it near the fusebox) (This cars are usually build from year 1989 to 2000) . Models such as: 300ZX, Z32, Maxima, 240SX, S13, S14, Skyline, SR20DE, SR20DET, RB20, Altima, Fairlady.

Consult for Nissan Package List:

1pc x Consult Interface for Nissan
1pc x RS232 Cable
1pc x CD Drive

Price:$29.00 Special Price:$25.00

ISUZU DC 24V Adapter Type II for GM Tech 2

Isuzu Tech2 can diagnose all Isuzu car model like UC, N, TF, F, C series.
The adapter should be used with GM Tech2 Interface

ISUZU DC 24V Adapter Connection:

Package including:

1pc x ISUZU TECH 2 24V Adapter Type II

Price:$796.99 Special Price:$739.99

VCADS Pro 2.40 for Volvo Truck Diagnostic Tool With Multi languages

Top 3 Reasons To Get VCADS for Volvo:

1. Software Version: 2.40
2. Supported Languages: English, French, Spanish, German, Italian, Russian, Hungarian, Dutch, Danish, Chinese, Norwegian, Polish, Turkish, Czech, Swedish, Japanese, Thai
3. Update By CD

Notice:
It Only Supports Windows XP System

VCADS for Volvo Function:

Diagnostic Program designed to read and clear fault codes.
Reprogram ECM parameters and ECMS
All features unlocked for the following manufacturers
[1] Volvo Truck Corporation
[2] Volvo Bus Corporation
[3] Volvo Penta
[4] Volvo Construction Equipment
[5] Mack
[6] FAW
[7] CNHTC
[8] OEM

PTT is a Windows-based diagnostic application specially designed to test, calibrate and program engine parameters. This software supports VN, VT, VHD, WG, WX and AC from model year 98 forward.Tests for fault tracing of Volvo D7C, D11F, D12B, D12C, D12D, D13F, D16D and D16F engines are incorporated into PTT.

Many funtions in today's modern vehicles are controlled by electronic control units(ESUs). ECUs control components such as the engine, instrumentation and certain vehicles funtions. PTT is a toolbox that bundles diagnostic (VCADS) and repair applications (Guided Diagnostics) together making it a one stop shop for the technicians. The main purpose of PTT is to support the diagnostic & repair process and to make it easier for technicians to work with the tools provided.

VCADS elite software is installed on a PC. The PC is connected to the communication connector in the vehicle via the communication interface(Volvo part number 9998555).
VCADS Elite provides tests and calibrations for VOLVO vehicles that are equipped with the Vehicle Electronics '98(VECTRO II) or Version 2 electronic control systtems. The application consists of a number of standrd graphical interfaces, such as graphs and continuous displays of parameters values. The operations are organized in the menu according to function groups. Some ECUs have changeable parameters that can be use to adjust or customize certain functions. Volvo ECUs often have two types of parameters: Customer parameters and Vehicle parameters.

Customers parameters can be programmed locally using VCADS Elite. Vehicle parameters genarally are used to configure the vehicle when it is built and alteration of these parameters requires a connection to VDA(Vehicle Data Administration) at Volvo . These parameters CANNOT be read or programmed with VCADS Elite. These changes must be performance by a Volvo Truck dealer.

VCADS for Volvo Adjustments and Improvements

- Support for new language: Thai
- Support for new models: FL and FE
- The Option dialog in the Tool menu has been updated.
- Manually entered chassis series are validated on the local computer.
- Possibility to correct parameter values that are incorrect according to specifications. Parameters with values that are not valid are marked with red color. Previously, this situation caused an error that interfered with parameter programming.
- Help desk tool is updated. The actions 1 - Update phone book and 3 - Change connection type are found under 1 - Central Communications Settings.
- Campaigns which have been downloaded in intermediate storage mode but are not reported will, after 30 days, be reported as not performed for safety reasons.
- If the hardware part number in the control unit differs from the hardware part number stored in the central systems, VCADS Pro will automatically check if there is an appropriate conversion kit available. If this is the case, a dialog box appears asking the user to run the conversion kit.
- New procedure for downloading of new versions of VCADS Pro.
- If there is unused or unreported software stored in Intermediate Storage, the user will be notified and have the possibility to view more detailed information.
- Help text updated with instructions for parameter programming by templates, the new Option dialog and information about new functionality in intermediate storage.
- Campaign handling will from now be reported after programming is finished and not at the next authenticated connection to central systems.
- The operation conversion kit has been split into two operations: Conversion kit and Accessory kit.
- Oscilloscope related operations for special tool 88890040 have updated oscilloscope software.
- New version of Perf: performance application. Version number: 2.5.3.
The following operations have been added or updated in VCADS Pro:
- 17012-3, 1700-21-03-02 Fault codes
- 17054-3, 1700-22-03-06 Accessory kit
- 20006-3, 2000-08-03-06 20006-3 Engine data statistics
- 2374-08-03-02, 23712-3 Injectors shut off, manual
- Support for Dennis Eagle (DE)

With VCADS Pro 2.40 for Volvo You Can Do:

1.VOLVO TRUCKS: AC, FM10, NH565, FH12, FM12, VHD, FH16, FM7, VN, WC, WG, WI, FH565, NH12, FL6,FL7, FL10, FL12, NH525, WX, COMP04, FE, VHD, FH, FM, VM, FM9, F10, F12 , F16, NL10, NL12
2.VOLVO BUSES: B10B, B10M, B10L, B10R, M10R, B12, B58, B6, B7R, OLYMPIAN, SUPEROLY
3..VOLVO CONSTRUCTION EQUIPMENT (CE):
Wheel loader: L110E, L110F, L120E, L120F, L150E, L150F, L180E, L180F, L220E, L220F, L330E, L350F, L60E, L60F, L70E, L70F, L90E, L90F
Articulated Hauler: A25D, A25E, A30D, A30E, A35D, A35E, A40D, A40E, T450D
Excavator: EC135B, EC140B, EC140C, EC160B, EC160C, EC180B, EC180C, EC210B, EC210C, EC235C, EC240B, EC240C, EC290B, EC290C, EC330B, EC330C, EC360B, EC360C, EC460B, EC460C, EC700C, EC700B, EC700C, ECR145C, ECR235C, ECR305C, EW140B, EW140C, EW145B, EW145C, EW160B, EW160C, EW180B, EW180C, EW200B, EW210C, FC2121C, FC2421C, FC2924C, FC3329C, PL4611
45.Grader: G710B, G720B, G726B, G730B, G740B, G746B, G780B, G930, G940, G946, G960 ,G970, G976, G990
5.Compact Excavator: ECR88

Package List:

1pc x 9998555 Adapter Main Unit
1pc x 8Pin to 16pin Cable
1pc x 14Pin to 16Pin Cable
1pc x Carry Box
1pc x Volvo VCADS(PTT 1.12) Software 2.40 Version Disc
1pc x COM Cable

Price:$179.00 Special Price:$144.00

General Motors Global Electrical Architecture (Global A) and Global Diagnostic Hardware
Global Diagnostic System DGS& Mutiple diagnostic Interface MDI

MDI and GDS Background
MDI is an interface between the vehicle DLC and a PC (by wired USB, wired Ethernet, wireless Ethernet ) and TIS2web.
Can be Used for SPS programming on existing and future S vehicles
Required for diagnostics on new S Global A Electrical Architecture Vehicles
Used with TIS2Web, Global Diagnostics System (GDS), SPS and MDI Manager Software
Allows for GDS diagnostic

Multiple Diagnostic Interface (MDI)
All current and most legacy vehicle protocols: UART, KW2000, CLASS2, LAN, etc.
Needed for Global A architechture vehicles
Supports Service Programming System (SPS)
Passthrough progrmming on past model and Global A vehicles
Supports PC-Based diagnostics with rollout of the Global Diagnositc System (GDS) application
Includes Flight Recorder Mode

New Diagnostic Application Software required for Global A Vehicles
Global Diagnostic System (GDS)
PC-based software diagnsotics
DTCs, Diagnostics, Data Display & Visualization, Device Controls, Special Tests, Flight Recorder management, etc.
GDS is software which runs on a specific PC. Updates received via TIS2Web.
Multiple display options. More space for diagnsotics. Session management for multiple us.

The Future of the Tech 2
The Tech 2 remains an essential tool through at least the 2010 model year. The MDI will not support past models when its diagnostic capabilities are introduced. And, the Tech2 will continue to be needed to diagnose all vehicles fromprevious model years. Remote programming with the Tech 2 will continue to be supported for use on all 2007 and previous vehicles.Additional information will be supplied in future.

HOW WILL THE MDI BE USED?
The new MDI can be used only in the Pass-Thru method. This means you can use it as your programming tool, while your Tech 2/CANdi remains available for diagnostics and other duties.

The MDI is initially being introduced with Pass-Thru programming capabilities only. It can be used to perform Pass-Thru programming on all vehicles built since 1996 and will support all vehicles into the future.

The MDI will be required to perform diagnostics on selected NAO vehicles for model year 2009. Diagnostic software is scheduled to be released for the MDI during the fourth quarter of 2008.

Regulations require programming procedures to be compliant with SAE Recommended Practice J2534. The SPS is compliant with SAE Recommended Practice J2534, and the MDI is compliant with the portions of SAE J2534 that are applicable for vehicles.

What protocols does the MDI support?
For immediate use ? At present, vehicles have two buses on the 16 pin connector
(high speed and low speed LAN). The MDI communicates using all of the existing protocols, the same as the Tech 2:
- UART
- Class 2
- KWP2000
- LAN (CAN)
Beginning with the 2008 model year vehicles, Pass-Thru will be the only programming method available. (Remote will continue to be available for previous vehicles.)

when you test after 2010 year car ,you can use gds2 software:

Price:$486.99 Special Price:$459.99

Super Volvo Dice Pro+ Volvo Diagnostic Tool (Silver Color)

Top 5 Reasons to Get the Super Volvo Dice Pro +

1.Software Version: 2014D
2.Update: By CD
3. Volvo Dice PRO+ is the newest Volvo car scanner which is used together with VIDA all-in-one to communicate with the vehicle.
Communication makes diagnosing and troubleshooting the vehicle possible, as well as downloading software.
4. VOLVO Dice Pro is assigned Volvo OEM scanner,It provid orignal trouble diagnostic, orignal work information system , DiCE Pro selftest , DiCE Pro automatic upgread by newer software version and alone SQL Server database.
5.VOLVO Dice Pro can do read DTC,How to repair DTC,Read Datastream,Actuation,Programming/coding.

Notice:
1. Can not support the cars before the year 1999.
2. Computer System Requirement: Professional Win7 Operating System Only

Super Volvo Dice Pro+ Supported Protocol:

The volvo cars has a lot of protocol,such as K-Line,CanBus,Signle CanBus,Manufacture K+Double CanBus and K+Signle CanBus.These protocols is improved in the auto delopment. DiCE Pro support all protocol of Volvo.

In order to facilitate the maintenance convenience, when the Car Dice Pro provides a holster and handle, can effectively protect the equipment, the user can be hung on the equipment or his belt. In equipment positive four lamp, it will tell whether good user equipment work in equipment, the operating instructions on the tools back.

Super Volvo Dice Pro+ Package List:

1pc x DICE Pro device
1pc x OBD-II cable
1pc x USB A to MINI USB angled cable
1pc x DiCE Pro Plastic box
1pc x DVD with VIDA 2014D

Price:$109.00 Special Price:$99.00

NitroData Chip Tuning Box for Motorbikers M5

Why we need to use Nitrodata chip tuning box?

As some motorcycles run richer and others are leaner, we suggest that you start by using the NitroData with the dial set to minimum and gradually increase the dial to a higher until you find the setting which is best for your bike. A slightly modified engine (sport exhaust, air filter etc.) will generally a better performance with the dial set around midle if the bike has an aftermarket exhaust system fitted. A setting between midle and midle more can be used
 
When the catalytic converter has been removed. The original standard performance is to be found at minimum setting on control unit.

If the bike running richer then the setting will probably need to be set between litle then minimum. You will feel from the performance of the motorcycle when the engine is running smoothly and it is not necessary to run a Dyno test. Please avoid falling into the trap of thinking the higher the maximum the better the performance as it will vary depending on the bike.  If it appears that you are losing the torque when you hit high speeds this most probably means that you have set the NitroData number too high and need to try a lower setting.

What you need to do to use Nitrodata chip tuning box?

To fit the NitroData you will need to locate the air temperature sensor (IAT) which is located near the air box on most bikes.Disconnect the plug connectors which are already attached to the IAT and attach the plug connectors of the NitroData module to the relevant connector of the IAT. The NitroData is now ready to use.

What motobike brand it can do?Does it has user manual?

Please check the technical service which next to the description.

NitroData Chip Tuning Box for Motorbikers M5 vehicle list:

Package Including:

1pc x NitroData Chip Tuning Box M5

Price:$39.99 Special Price:$29.99

NitroData Chip Tuning Box for Motorbikers M3

Why we need to use Nitrodata chip tuning box?

As some motorcycles run richer and others are leaner, we suggest that you start by using the NitroData with the dial set to minimum and gradually increase the dial to a higher until you find the setting which is best for your bike. A slightly modified engine (sport exhaust, air filter etc.) will generally a better performance with the dial set around midle if the bike has an aftermarket exhaust system fitted. A setting between midle and midle more can be used
 
When the catalytic converter has been removed. The original standard performance is to be found at minimum setting on control unit.

If the bike running richer then the setting will probably need to be set between litle then minimum. You will feel from the performance of the motorcycle when the engine is running smoothly and it is not necessary to run a Dyno test. Please avoid falling into the trap of thinking the higher the maximum the better the performance as it will vary depending on the bike.  If it appears that you are losing the torque when you hit high speeds this most probably means that you have set the NitroData number too high and need to try a lower setting.

What you need to do to use Nitrodata chip tuning box?

To fit the NitroData you will need to locate the air temperature sensor (IAT) which is located near the air box on most bikes.Disconnect the plug connectors which are already attached to the IAT and attach the plug connectors of the NitroData module to the relevant connector of the IAT. The NitroData is now ready to use.

What motobike brand it can do?Does it has user manual?

Please check the technical service which next to the description.

NitroData Chip Tuning Box for Motorbikers M3 vehicle list:

Package including:

1pc x NitroData Chip Tuning Box M3

Price:$39.99 Special Price:$29.99

Top 5 Reasons To Get DSG Reader:

1. Supported Language: English Only
2. It is used for AUDI and for VW new cars
3. Operating System Requirement: WIN XP System
4. After you install the software, you need to send us the ID for activation. otherwise, it will tell " License Expired"
5. MINI DSG Reader Installation Manual

Usually the tool for reading/writing new for VW/AUDI gearbox data is few and very expensive, now the low cost tool is coming. You don't need remove ecu from car, only connect some plug to the DSG ECU and then you can read/write and save dump to bin flie.
MINI DSG reader(DQ200+DQ250) is dedicated to read and write for VW / AUDI latest dual-clutch DSG gearbox data and it is currently the empty non-original equipment.

Newly Added Vehicle Coverage List:

For AUDI Q7 BOSCH GS19 11 1MB
For AUDI RS6 BOSCH GS19 2MB
ForAUDI S4 BOSCH GS19 04 1MB
For Daewoo Lacetti Denso v2
For Lotus Europa S Delco GMPT
For Opel Astra G Motorola GMPT E15
For Opel Astra J Delco 5[v1]
For Opel Astra J Delco 5[v2]
For Opel Astra J Delco 5[v4]
For Opel Insignia Delco 5[V2]
For Opel Insignia Delco 5[V3]
For Opel Speadster Motorola GMPT E15
For Opel Zafira B Delco TP
For Vauxhall Astra G Motorola GMPT E15
For Vauxhall Astra J Denso v1
For Vauxhall Insignia Denso
For Vauxhall Zafira Motorola GMPT E15

Parking List

1*MINI DSG Reader

Price:$265.00 Special Price:$245.00

NitroData Chip Tuning Box for Motorbikers M2

Why we need to use Nitrodata chip tuning box?

As some motorcycles run richer and others are leaner, we suggest that you start by using the NitroData with the dial set to minimum and gradually increase the dial to a higher until you find the setting which is best for your bike. A slightly modified engine (sport exhaust, air filter etc.) will generally a better performance with the dial set around midle if the bike has an aftermarket exhaust system fitted. A setting between midle and midle more can be used
 
When the catalytic converter has been removed. The original standard performance is to be found at minimum setting on control unit.

If the bike running richer then the setting will probably need to be set between litle then minimum. You will feel from the performance of the motorcycle when the engine is running smoothly and it is not necessary to run a Dyno test. Please avoid falling into the trap of thinking the higher the maximum the better the performance as it will vary depending on the bike.  If it appears that you are losing the torque when you hit high speeds this most probably means that you have set the NitroData number too high and need to try a lower setting.

What you need to do to use Nitrodata chip tuning box?

To fit the NitroData you will need to locate the air temperature sensor (IAT) which is located near the air box on most bikes.Disconnect the plug connectors which are already attached to the IAT and attach the plug connectors of the NitroData module to the relevant connector of the IAT. The NitroData is now ready to use.

What motobike brand it can do?Does it has user manual?

Please check the technical service which next to the description.

NitroData Chip Tuning Box for Motorbikers M2 vehicle list:

Package including:

1pc x NitroData Chip Tuning Box M2

Price:$39.99 Special Price:$29.99

NitroData Chip Tuning Box for Motorbikers M10

Why we need to use Nitrodata chip tuning box?

As some motorcycles run richer and others are leaner, we suggest that you start by using the NitroData with the dial set to minimum and gradually increase the dial to a higher until you find the setting which is best for your bike. A slightly modified engine (sport exhaust, air filter etc.) will generally a better performance with the dial set around midle if the bike has an aftermarket exhaust system fitted. A setting between midle and midle more can be used
 
When the catalytic converter has been removed. The original standard performance is to be found at minimum setting on control unit.

If the bike running richer then the setting will probably need to be set between litle then minimum. You will feel from the performance of the motorcycle when the engine is running smoothly and it is not necessary to run a Dyno test. Please avoid falling into the trap of thinking the higher the maximum the better the performance as it will vary depending on the bike.  If it appears that you are losing the torque when you hit high speeds this most probably means that you have set the NitroData number too high and need to try a lower setting.

What you need to do to use Nitrodata chip tuning box?

To fit the NitroData you will need to locate the air temperature sensor (IAT) which is located near the air box on most bikes.Disconnect the plug connectors which are already attached to the IAT and attach the plug connectors of the NitroData module to the relevant connector of the IAT. The NitroData is now ready to use.

What motobike brand it can do?Does it has user manual?

Please check the technical service which next to the description.

NitroData Chip Tuning Box for Motorbikers M10 vehicle list:
Aprilia Pegaso 660 01-08
Kawasaki 636 03-06
Kawasaki GTR 1400 08-10
Kawasaki VN 2000 04-06
Kawasaki Z1000 03-10
Kawasaki Z750 04-10
Kawasaki Z750S Semicarenata
Kawasaki ZX 10 R 04-07
Kawasaki ZX 6R 03-06
Kawasaki ZX 6RR 09-10
Kawasaki ZZR 1400 06-08
Malaguti Password EU3 250 07-08
Suzuki B King 08-09
Suzuki GSX R 600 06-07
Suzuki GSX R 750 06-07
Suzuki Intruder M800 06-10
Suzuki LT-F KingQuad 400 08-10
Suzuki LT-A KingQuad 700 K6 K67
Suzuki LT-A-X KingQuad 750 K8 10-
Yamaha FZ6 Fazer 04-08
Yamaha FZ6 Fazer
Yamaha FZ6 Fazer S2
Yamaha FZ6 Fazer S2 ABS
Yamaha Majesty 400 04-08
Yamaha MT 03 06-08
Yamaha R1 04-06
Yamaha R1 04-06
Yamaha R6 03-05
Yamaha RX Max 125 06-08
Yamaha RX Max 250 07-08
Yamaha T MAX 04-10
Yamaha WR R / X 250 08-
Yamaha X-City 125 08-
Yamaha X-City 125 07-08
Yamaha XT 660 X / R
Yamaha XT R / X / Z 04-08
Yamaha YFM Raptor 700 07-09

Package Including:

1pc x NitroData Chip Tuning Box M10

Price:$39.99 Special Price:$29.99

NitroData Chip Tuning Box for Motorbikers M1

Why we need to use Nitrodata chip tuning box?

As some motorcycles run richer and others are leaner, we suggest that you start by using the NitroData with the dial set to minimum and gradually increase the dial to a higher until you find the setting which is best for your bike. A slightly modified engine (sport exhaust, air filter etc.) will generally a better performance with the dial set around midle if the bike has an aftermarket exhaust system fitted. A setting between midle and midle more can be used
 
When the catalytic converter has been removed. The original standard performance is to be found at minimum setting on control unit.

If the bike running richer then the setting will probably need to be set between litle then minimum. You will feel from the performance of the motorcycle when the engine is running smoothly and it is not necessary to run a Dyno test. Please avoid falling into the trap of thinking the higher the maximum the better the performance as it will vary depending on the bike.  If it appears that you are losing the torque when you hit high speeds this most probably means that you have set the NitroData number too high and need to try a lower setting.

What you need to do to use Nitrodata chip tuning box?

To fit the NitroData you will need to locate the air temperature sensor (IAT) which is located near the air box on most bikes.Disconnect the plug connectors which are already attached to the IAT and attach the plug connectors of the NitroData module to the relevant connector of the IAT. The NitroData is now ready to use.

What motobike brand it can do?Does it has user manual?

Please check the technical service which next to the description.

NitroData Chip Tuning Box for Motorbikers M1 vehicle list:

Package including:

1pc x NitroData Chip Tuning Box

Price:$39.99 Special Price:$29.99

VOLVO 8Pin Cable for DPA5 Scanner

Package List:

1pc x VOLVO 8Pin Cable for DPA5 Scanner

Price:$14.99 Special Price:$11.99

NitroData Chip Tuning Box for Motorbikers M11

Why we need to use Nitrodata chip tuning box?

As some motorcycles run richer and others are leaner, we suggest that you start by using the NitroData with the dial set to minimum and gradually increase the dial to a higher until you find the setting which is best for your bike. A slightly modified engine (sport exhaust, air filter etc.) will generally a better performance with the dial set around midle if the bike has an aftermarket exhaust system fitted. A setting between midle and midle more can be used
 
When the catalytic converter has been removed. The original standard performance is to be found at minimum setting on control unit.

If the bike running richer then the setting will probably need to be set between litle then minimum. You will feel from the performance of the motorcycle when the engine is running smoothly and it is not necessary to run a Dyno test. Please avoid falling into the trap of thinking the higher the maximum the better the performance as it will vary depending on the bike.  If it appears that you are losing the torque when you hit high speeds this most probably means that you have set the NitroData number too high and need to try a lower setting.

What you need to do to use Nitrodata chip tuning box?

To fit the NitroData you will need to locate the air temperature sensor (IAT) which is located near the air box on most bikes.Disconnect the plug connectors which are already attached to the IAT and attach the plug connectors of the NitroData module to the relevant connector of the IAT. The NitroData is now ready to use.

What motobike brand it can do?Does it has user manual?

Please check the technical service which next to the description.

NitroData Chip Tuning Box for Motorbikers M11 vehicle list:
Aprilia Falco 00-10
Aprilia RSV 1000 98-03
Aprilia RSV 1000 SP / Tuono 99-00
Aprilia RSV 1000R / Tuono 05-
Aprilia RSV R 05-
Aprilia Tuono / Tuono 02-05
Buell 1125 R / CR
Buell S1
Buell S2
Buell S3
Buell X1
Buell XB1
Buell XB12 S / SS / CG
Buell XB12 X / XT
Buell XB9 S
Cabiva Navigator
Cabiva Navigator 1000
Cabiva Raptor 1000
Cabiva Raptor 1000 - X3
Cabiva Raptor 650 IE
Suzuki Burgman 650 03-10
Suzuki GSR 600 06-09
Suzuki GSX R 600 01-05
Suzuki GSX 1400 07-
Suzuki GSX R 1000 01-06
Suzuki GSX R 750 96-05
Suzuki Mayabusa 1300 00-07
Suzuki Intruder 1500 05-08
Suzuki SV 1000 03-07
Suzuki SV 1000 N
Suzuki SV 1000 S
Suzuki SV 650 S / N 03-06
Suzuki TL 1000 97-01
Suzuki TL 1000 R
Suzuki TL 1000 S
Suzuki V Strom 1000 02-09
Suzuki V Strom 650 04-06
Suzuki VZ R/N 1800 06-09
Yamaha TDM 900

Package Including:

1pc x NitroData Chip Tuning Box M11

Price:$39.99 Special Price:$29.99

NitroData Chip Tuning Box for Motorbikers M9

Why we need to use Nitrodata chip tuning box?

As some motorcycles run richer and others are leaner, we suggest that you start by using the NitroData with the dial set to minimum and gradually increase the dial to a higher until you find the setting which is best for your bike. A slightly modified engine (sport exhaust, air filter etc.) will generally a better performance with the dial set around midle if the bike has an aftermarket exhaust system fitted. A setting between midle and midle more can be used
 
When the catalytic converter has been removed. The original standard performance is to be found at minimum setting on control unit.

If the bike running richer then the setting will probably need to be set between litle then minimum. You will feel from the performance of the motorcycle when the engine is running smoothly and it is not necessary to run a Dyno test. Please avoid falling into the trap of thinking the higher the maximum the better the performance as it will vary depending on the bike.  If it appears that you are losing the torque when you hit high speeds this most probably means that you have set the NitroData number too high and need to try a lower setting.

What you need to do to use Nitrodata chip tuning box?

To fit the NitroData you will need to locate the air temperature sensor (IAT) which is located near the air box on most bikes.Disconnect the plug connectors which are already attached to the IAT and attach the plug connectors of the NitroData module to the relevant connector of the IAT. The NitroData is now ready to use.

What motobike brand it can do?Does it has user manual?

Please check the technical service which next to the description.

NitroData Chip Tuning Box for Motorbikers M9 vehicle list:
Aprilia RXV 450 06-09
Aprilia RXV 550 06-09
Aprilia RXV 06-10
Aprilia RXV-SXV 450 06-10
Aprilia RXV-SXV 550 06-10
Aprilia SXV 06-10
Ducati Multistrada 1200
Hyosung Aquila 650 07-09
Hyosung Comet GT 650
Hyosung Comet GT 650R
Kawasaki ER6 F
Kawasaki ER6 N 06-10
Kawasaki KFX / R 450 08-10
Kawasaki KLE Versis 07-10
Kawasaki KLX 125
Kawasaki KLX 250 09-10
Kawasaki KVF Brute Force 08-10
Kawasaki Ninja 250 08-10
Kawasaki VN 1700 10-
Kawasaki VN 2000 08-
Kawasaki VN 2000 09-10
Kawasaki VN 900 06-09
Kawasaki Z1000 10-11
Kawasaki ZX 10 R 08-10
Kawasaki ZX 6R 09-10
MV Agusta Brutale 990 R 1090 RR 10-
Suzuki SFV Gladius 650 09-10
Suzuki SV 650 S / N 07-10
Suzuki V Strom 650 07-10
Suzuki Intruder C800 01-10
Sym Moto Citycom 300 09-10
Sym Moto Joymax euro3 - 250 07-
Sym Moto Joymax evo 300 09-10
Triumph Bonnevil 08
Triumph Thruxton
Yamaha FZ 8-N 11-
Yamaha FZ1 06-10
Yamaha FZ1 Fazer
Yamaha FZ1 Naked
Yamaha MT 01 05-07
Yamaha R1 07-10
Yamaha R6 06-10
Yamaha Road Star Warrior
Yamaha Stratoliner Midnight Star
Yamaha V MAX 09-10
Yamaha XJ 6 S/N / Diverion 09-10
Yamaha XJR 1300 07-09
Yamaha XTZ Supertenere 1200 10-
Yamaha XV 1300
Yamaha XV 1900 06-09
Yamaha XVS 1300
Yamaha XVS 950 09-10
Yamaha XVS A 1300 07-09
Yamaha YFM Grizzly 700 07-09
Yamaha YFZ 450 R 09-
Yamaha YXR RHINO 700 08-09
Yamaha YZF 450

Package including:

1pc x NitroData Chip Tuning Box M9

Price:$69.99 Special Price:$51.99

SVDI VAG Command V18+BMW Commander V9.6+Immoplus+Tag Key Tool

Top 4 Reasons to Get SVDI

1. Support VW, Audi, Skoda, Seat ,BMW and TAG Key Tool Software
VW, Audi, Skoda, Seat Software Version: V18
BMW Software Version: V9.6
TAG key tool Software Version: V5.8

2. Multi-Languges
VW, Audi, Skoda, Seat Software Language Available: English, Simplified Chinese, German, Spanish, French, Russian, Italian, Danish, Czech, Bulgarian
TAG Key Tool Software Language Available: English
3. Newest SVDI Plugin Version: V2.3

Notice:
1. BMW software need open authorization,if needed,pls inform the SN number,we will open it for you
2. SVDI software can only installed on WINDOWS XP SP2/SP3, not working on Windows Vista or Windows 7

What is SVDI?

SVDI is the newest car and truck diagnostic adapter for VW/AUDI; it has the same function as the original AVDI.
SVDI is Compatible with the Following Software:
1) VW, Audi, Skoda, Seat ,BMW,software
2) TAG key tool software

SVDI Highlights:

1 Read PIN code via OBD
2 Match key via OBD, generate dealer key
3 Calibrate odometer via OBD
4 Clear airbag (SRS) crash data via OBD
5 Read and write flash memory of Engine via OBD, reset the times of flashing
6 Able to remove the limit to the car TV speed that the MMI-TV system of some car models put on.
7 Calculate code- support both the long and short code.
8 Synchronize KESSY dashboard and ELV (Electric Steering Lock)

Features:

1) Program the key for the newest BMW F series via reading CAS4 data. But you must open the Authorization of BMW. Then you can do this function
2) Generate the chip ID67,ID68,ID70,TP22,TP23,TP24 and so on.
3) Via reading immobilizer unit data, generate the keys for Fiat, Toyota, Ford, BMW, Audi /VW Kessy, Mercedes, Jeep and more.
4) Copy the following chip: Megamos 13, Temic 11/12 and Philips ID33
5) Generate TPX2 chip from The Texas TIRIS 4D chip of Toyota Lexus
6) Generate TPX2 chip from Texas TIRIS 4D chip (need to connect to internet)
7) Generate TPX1 chip from Texas TIRIS 4C
8) Program key for BMW 7943, 7944

Basic Diagnostic Function:

1) SVDI Supported protocols: KWP2000(TP2.0, TP1.6), UDS CAN, KWP1281
2) Read the identifier (Identification Number) for electronic control units (ECU)
3) Read trouble codes for electronic control units (ECU)
4) Erase trouble codes for electronic control units (ECU)
5) Output test
6) Coding modules
7) Scan electronic control units (ECU)
8) Broadcast request
9) Measure value
10) Match channel

SVDI Special Function:

1. CAN Dashboard
1) Correct odometer via OBD, the supported car models as follows: VW Golf6, VW Multivan (2009 - ) , VW EOS (2009 - ), VW Caddy (2009 - ), VW Scirocco, VW Polo (2009 - ), VW Bora (2010 - ), Volkswagen Jetta (2010 - ), Volkswagen Passat CC, Volkswagen Amarok, Skoda Octavia II (2009 - ), Skoda Hao Rui (2009 - ), (2009 - ) Skoda Fabia, Skoda Yeti (2009 - ), Seat Leon (2009 - ), SEAT Altea (2009 - ), SEAT Exeo (2009 - ), Seat Ibiza (2009 - )
2) Support VDO instrument cluster (year 2006 - )
3) Read and write the related data in the dashboard
4) Read immobilizer security code
5) Read PIN code and protect component data via OBD for VW Crafter
6) Read and write NEC MCU (year 2009 - ) immobilizer data

2.EZS – Kessy (Q7/A6/Allroad)
1) Generate Dealer Key
2) Read and write EEPROM data from EZS – Kessy(Q7/A6/Allroad).

3.K-Line Dashboard
1) With this function you can establish diagnostic session with the Instrument cluster via K-Line (KWP1281 or KWP2000)
2) Read and correct odometer
3) Read PIN code
4) Read and write EEPROM
5) 5) Read ROM / Flash from the Instrument cluster
6) Automatically erase "DEF trouble" (Audi A4 with Bosch RB8 dashboard)

4. Engine Control Unit
1) Read EDC17 / MED17 flash memory
2) Read and write flash memory (EDC15, EDC16 all types. Calculate, program and calibrate ME7. 1.1, MED9.x, ME7.5 )
3) Read and write flash calculator(EDC16)
4) Read and write EEPROM(VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.)
5) Read security access code or PIN code (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, EDC17, MED9.x, Simos PPD)
6) Read component security bytes (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, MED17.5.1, MED 9.x, Simos PPD)
7) Enable / disable immobilizer for EDC15, ME7.x, EDC16
8) Correct odometer for EDC15, EDC16

5. Component Protection Manager: Component Protection Manager – match, program component protection (Audi A6/Q7/Allroad/A4/A5/Q5)

6. ECU adaptation by OBDII: Add new engine control units by OBDII - EDC16, EDC17, MED17, MED9, Simos petrol, SIMOS PPD Diesel, ME7.5.20, ME 7.5.30

7. BCM2 - Audi A4/A5/Q5 2007+ key programming: Program key for A4/A5/Q5 (2007 - ) with the BCM2 module

8. Program steering lock: After replacing the module of steering lock, you can program steering wheel lock for Volkswagen Touareg / VW Phaeton / Porsche Cayenne / Bentley Continental / Audi A8.

9. TV activation ED1/ED2: Remove the limit to the car TV speed.

10. Key Learning
1) Program key via OBD (With 16 component security bytes) - VW Crafter, Audi R8, VW Golf 6, VW Multivan (2009 - ) , VW EOS (2009 - ) , VW Caddy (2009 - ) , VW Scirocco, VW Polo (2009 - ) , VW Bora (2010 - ) , VW Jetta (2010 - ) Skoda Octavia II (2009 - ) , Skoda Hao Rui (2009 - ) , (2009 - ) Skoda Fabia, Skoda Yeti (2009 - ) , Seat Leon (2009 - ) , SEAT Altea (2009 - ) , SEAT Exeo (2009 - ) , Seat Ibiza (2009 - )
2) Support chip TP22/TP23/TP24/TP25 and 48, and generate as any key as you want.
3) Directly use 48 chip to learn key without generating dealer key for the chip TA2/TA3/TA4/TA5
4) Read the 7th byte security code from the working key (Megamos, Hitag2)
5) Support key learning for Lamborghini Gallardo

11. Dump Tool: After the EEPROM of corresponding unit is read out, calculate security access code and correct mileage by the dump tool.

12. Airbag (SRS)
1) Read / write Siemens EEPROM of airbag module (Audi A6/Q7/Allroad, VW Golf5 ..., Skoda Octavia II ..., SEAT Altea ...)
2) Clear airbag crash data.

13. Customize read / write: Customize read and write by computer for a part of units.

14. PIN Converter

15. Service Light Reset

16. Remote Control Programming

17. Navigation: Enable / Disable navigation system "Eject" button.

18. Cruise Control System: Enable / Disable cruise control system, modify steering wheel electronics (SWE) system configuration

19. Brake Pedal

TAG Key Tool Supported Chip:

Megamos 13,
Megamos 48 (Megacrypt I),
Megamos 8E (Megacrypt II),
Texas 4C,
Texas 4D,
Temic 11,
Temic 12,
T5,
TK5555,
Philips PIT - 7930/7931/7935 (PIT),
Philips HITAG2–7936, 7941, 7942, 7943, 7944, 7945, 7946, 7947, 7953, 7961,
Hitag-Pro 7937, 7938, 7939, 7952,
JMA TPX1, TPX2

Package List:

1pc x SVDI Main Unit
1pc x OBDII Cable
1pc x Adapter Connect Cable
1pc x TAG Key Tool
1pc x USB Cable
1pc x CD

Price:$666.99 Special Price:$635.99

NitroData Chip Tuning Box for Motorbikers M6

Why we need to use Nitrodata chip tuning box?

As some motorcycles run richer and others are leaner, we suggest that you start by using the NitroData with the dial set to minimum and gradually increase the dial to a higher until you find the setting which is best for your bike. A slightly modified engine (sport exhaust, air filter etc.) will generally a better performance with the dial set around midle if the bike has an aftermarket exhaust system fitted. A setting between midle and midle more can be used
 
When the catalytic converter has been removed. The original standard performance is to be found at minimum setting on control unit.

If the bike running richer then the setting will probably need to be set between litle then minimum. You will feel from the performance of the motorcycle when the engine is running smoothly and it is not necessary to run a Dyno test. Please avoid falling into the trap of thinking the higher the maximum the better the performance as it will vary depending on the bike.  If it appears that you are losing the torque when you hit high speeds this most probably means that you have set the NitroData number too high and need to try a lower setting.

What you need to do to use Nitrodata chip tuning box?

To fit the NitroData you will need to locate the air temperature sensor (IAT) which is located near the air box on most bikes.Disconnect the plug connectors which are already attached to the IAT and attach the plug connectors of the NitroData module to the relevant connector of the IAT. The NitroData is now ready to use.

What motobike brand it can do?Does it has user manual?

Please check the technical service which next to the description.

NitroData Chip Tuning Box for Motorbikers M6 vehicle list:
Aprilia Dorsoduro 08-10 BoX M-6
Aprilia RSV 4 09-10 BoX M-6
Aprilia Shiver 08-10 BoX M-6
Ducati 1098 BoX M-6
Ducati 1098 R BoX M-6
Ducati 1098 S BoX M-6
Ducati 1198 BoX M-6
Ducati 1198 R BoX M-6
Ducati 1198 S BoX M-6
Ducati 620 Sport BoX M-6
Ducati 748-S-R-A-SPS-R-Racing-BIP BoX M-6
Ducati 749-S-R-A-SPS-R-Racing-BIP BoX M-6
Ducati 848 BoX M-6
Ducati 916 BoX M-6
Ducati 996-SPS-S-RS-Racing-SP-Biposto BoX M-6
Ducati 998-RS BoX M-6
Ducati 999-S-R-RS BoX M-6
Ducati Desmosedici BoX M-6
Ducati Hypermotard EVO/SP 1100 BoX M-6
Ducati Hypermotard S 796 BoX M-6
Ducati MH Evoluzione BoX M-6
Ducati MH Evoluzione 900 BoX M-6
Ducati Monster 696 BoX M-6
Ducati Monster 900 IE BoX M-6
Ducati Multistrada 1100-1000 BoX M-6
Ducati Multistrada 1100-1100S BoX M-6
Ducati Multistrada 620 BoX M-6
Ducati Multistrada DS1000 BoX M-6
Ducati Sport 750 BoX M-6
Ducati Sport 900 BoX M-6
Ducati ST2 BoX M-6
Ducati ST3 1000 BoX M-6
Ducati Street Fighter BoX M-6
Ducati Super Sport 750 IE BoX M-6
Ducati Super Sport 900 IE BoX M-6
Gas Gas EC / SM 450 / 515 BoX M-6
Gas Gas FSE / R 400 / 450 BoX M-6
Gas Gas FSR EC / SM BoX M-6
Gas Gas WILD HP BoX M-6
Harley Davidson DYNA 1450 Injection BoX M-6
Harley Davidson DYNA 1480 Injection BoX M-6
Harley Davidson EVO 1340 Injection BoX M-6
Harley Davidson FLHR Road King BoX M-6
Harley Davidson FLHRC Road King Classic BoX M-6
Harley Davidson FLHT Electra Glide BoX M-6
Harley Davidson FLHTCU Ultra Classic BoX M-6
Harley Davidson FLHX Street Glide BoX M-6
Harley Davidson FLSTC Haritage Softail BoX M-6
Harley Davidson FLSTF FAT BOY BoX M-6
Harley Davidson FLSTSB Sostai Cross Bones BoX M-6
Harley Davidson FXCW Sotfail Rocker BoX M-6
Harley Davidson FXCWC Sostai Rocket C BoX M-6
Harley Davidson FXDB Dyna Street BOB BoX M-6
Harley Davidson FXDC Dyna Super Glide BoX M-6
Harley Davidson FXDF Dyna FAT BOB BoX M-6
Harley Davidson FXSTB Night Train BoX M-6
Harley Davidson FXSTC Softail BoX M-6
Harley Davidson Softail 1450 Injection BoX M-6
Harley Davidson Softail 1580 Injection BoX M-6
Harley Davidson Touring Twin Cam 1450 BoX M-6
Harley Davidson Touring Twin Cam 1584 BoX M-6
Harley Davidson Twin Cam 1450 Injection BoX M-6
Moto Guzzi Bellagio BoX M-6
Moto Guzzi Breva 1200 BoX M-6
Moto Guzzi Breva 750 IE BoX M-6
Moto Guzzi California 1100 IE BoX M-6
Moto Guzzi Centauro 1000 4V BoX M-6
Moto Guzzi Griso BoX M-6
Moto Guzzi Nevada IE BoX M-6
Moto Guzzi Norge IE BoX M-6
Moto Guzzi Quota 1100 BoX M-6
Moto Guzzi Quota 1100 ES BoX M-6
Moto Guzzi Sport 1100 BoX M-6
Moto Guzzi Stelvio BoX M-6
Moto Guzzi V11 LE Mans BoX M-6
Moto Guzzi V7 IE BoX M-6

Package Including:

1pc x NitroData Chip Tuning Box M6

Price:$39.99 Special Price:$29.99

High Quality Piwis Tester II Diagnostic Tool For Porsche With CF30 Laptop and Latest Software PIWIS II V15.6

Top 7 Reasons to Get Porsche Piwis Tester II

1. Software Version: V15.6 (Return back the hdd for update,or can update directly, update cost is different according to the QC number,if the last three numbers of your QC mark is 137,hdd cost is70USD,if the last three numbers of your QC mark is 098, hdd cost is 176USD, contact customer sevice for more details )
2. Laptop: CF-30 (Second Hand)---Software is inside the Hard Drive. No need Installation
3. Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch
4. Update Method: By HDD (Need to return hard disk to us for upgrade, or you can just buy from us another hdd with newest software) Software contains operating system win XP only. you just need to insert into your computer and use it.
5. Requires Online Modules: (F BCM R BCM DME ELV SRS KEY)
6. Bluetooth, GPS and Navigation Function are available. But need to pay for the authorization of them.
7. Support Key Programming function, cost 220USD per time (you need consult our customer sevice first with the type and year of your car)

Notice:
1. Please do not take out the hard disk from CF-30 laptop and install on other laptops, it may cause data lose and hard to recovery.
2. Piwis Tester II works with Porsche cars year after 2005
3. when you connect with device,you will get an indication "Found New Hardware Wizard",make sure you click "next" to continue installing the driver, ortherwise the piwis 2 cannot be recognized by computer

Piwis Tester II for Porsche Functions:

1. Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram.
2. Porsche Piwis Tester II works with car year after 2005 and latest Porsche cars. It is equipped with the Panasonic laptop and original software for the test. Porsche Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.
3. New Panamera can only be diagnosed by using Porsche Piwis Tester II. Based on current project planning, all earlier vehicle models will gradually be changed over to the new Porsche Piwis Tester II by the end of 2010. Porsche Piwis Tester I must be used for older models in the Porsche workshop until end of 2010.
4. Support for Porsche. Piwis Tester I will no longer be available once the earlier diagnostic programs have been transferred to Porsche Piwis Tester II.
5. When Porsche Piwis Tester II is distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.

Piwis Tester II Support Systems:

ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

Piwis Tester II Vehicle Coverage:

1. 911(997) (991)
2. Boxster/Cayman (987)
3. Cayenne up to MY 2010
4. Cayenne from MY 2011
5. Panamera
6. Support 2013 year Porsche car models

Piwis Tester II Packing List:

1pc x Piwis Tester II VCI
1pc x OBDII Cable
1pc x USB Cable
1pc x Extensional Cable
1pc x Used PANASONIC CF30

Piwis Tester II After Sales Service:

1. One Year Free Maintenance
2. One Year Free Update
3. Long-term Technical Support

FAQ:

Q1: How to accomplish Porsche Piwis Tester II online function?
A1: Porsche Piwis Tester II online is via Team Viewer remote control, globally available.

Q2: How to handle with 90 days locking about Porsche Piwis Tester II?
A2: Porsche Piwis Tester II timing is unlimited, always showing 90 days.

Q3: How much software update charges for per year?
A3: The first year software update fee is free.

Q4: How to update Piwis Tester II for Porsche?
A4: By CD or HDD. When you want update. you can contact with our customer service as well

Q5: If it is showing Porsche Logo when booting computer?
A5: Yes, CF-31R, CF30K are with Porsche Logo when booting computer.

Q6: License Validity?
A6: To support ONLINE function, valid certificate must be available for Porsche Piwis Tester II.

Q7: Where could get Laptop Power-on Password?
A7: Normally ours is piwis-3456, or piwis-4567. Or you can see the stickers on laptop. (Attached pic shows). If there is any problem, can contact customer service freely.

Price:$1,389.99 Special Price:$989.00

2016 Good Quality Hyundai GDS VCI for Hyundai Kia Cars with N-H-01-16 and N-K-01-13 US version Software

Pls note:
1. this GDS VCI is not comes with Wifi functions.
2.N-H-01-16 is software for Hyundai cars, N-K-01-13 is software for Kia cars, both softwares are all included.
3. the Software is not based on VMwareplayer, can fit for any kinds of laptops.


Description
GDS VCI Diagnostic Tool is an advanced service system that provides comprehensive coverage for all Hyundai vehicles including all Hybrid cars. GDS provides complete diagnostics, analysis and reprogramming capabilities as well as a huge library of technical, service and repair information. And now buy it.you can get NEW kia GDS software free.

GDS VCI Diagnostic Tool for KIA Hyundai Features:

1. Completely Integrated Diagnostic System with User Specific information & settings
2. Complete Technical Service Information
3. Comprehensive & Customized Diagnostic Solution
4. Guided Troubleshooting Procedures
5. Mobile Data-recording Function
6. Real-time Software Management


VCI Major Function
- CAN Communication Capability
- Powerful Flight Record Function
- DTC reading, Sensor data reading
- Actuator Driving
- ECU Upgrade (Reprogram)
- Advanced diagnostic Functions

Specification:
Item Specifications
Micro Controller ARM9 (S3C2410A) @ 208MHz
Memory RAM 32MByte
ROM 32MByte
Operating Voltage 7~35VDC
Operating Mode Diagnosis Function / Flight Record Function
Current Consumption Typical 350mA @12V
Housing ABS & Rubber Shroud

VCI
Item Specifications
CAN CAN 2.0B
K-Line/L-Line ISO-9141, ISO-9141-CARB, KWP-2000
Commercial Veh SAE-J1708, RS-232C
Data/Control Line Melco Pull-Down UART

Packing list:
1. VCI Module (P/N: GHDM-210000)
2. 26-Pin - 16-Pin DLC Cable (P/N: GHDM-241000)
3.Mini USB Cable (P/N: GHDM-360000)
4.AC-DC Power Adapter (P/N: GHDM-260001) )
5. one hdd with software can fit for any kinds of laptops

Price:$725.99 Special Price:$698.99

NitroData Chip Tuning Box for Motorbikers M7

Why we need to use Nitrodata chip tuning box?

As some motorcycles run richer and others are leaner, we suggest that you start by using the NitroData with the dial set to minimum and gradually increase the dial to a higher until you find the setting which is best for your bike. A slightly modified engine (sport exhaust, air filter etc.) will generally a better performance with the dial set around midle if the bike has an aftermarket exhaust system fitted. A setting between midle and midle more can be used
 
When the catalytic converter has been removed. The original standard performance is to be found at minimum setting on control unit.

If the bike running richer then the setting will probably need to be set between litle then minimum. You will feel from the performance of the motorcycle when the engine is running smoothly and it is not necessary to run a Dyno test. Please avoid falling into the trap of thinking the higher the maximum the better the performance as it will vary depending on the bike.  If it appears that you are losing the torque when you hit high speeds this most probably means that you have set the NitroData number too high and need to try a lower setting.

What you need to do to use Nitrodata chip tuning box?

To fit the NitroData you will need to locate the air temperature sensor (IAT) which is located near the air box on most bikes.Disconnect the plug connectors which are already attached to the IAT and attach the plug connectors of the NitroData module to the relevant connector of the IAT. The NitroData is now ready to use.

What motobike brand it can do?Does it has user manual?

Please check the technical service which next to the description.

NitroData Chip Tuning Box for Motorbikers M7 vehicle list:
Ducati 998-S-R-Matrix BoX M-7
Ducati Monster 1000 BoX M-7
Ducati Monster 400 BoX M-7
Ducati Monster 620 BoX M-7
Ducati Monster 750 IE BoX M-7
Ducati Monster 800 BoX M-7
Ducati Monster S1000 BoX M-7
Ducati Monster S2R 1000 BoX M-7
Ducati Monster S2R 1000DS BoX M-7
Ducati Monster S4 BoX M-7
Ducati Paul Smart BoX M-7
Ducati S 2R 800 NO BoX M-7
Ducati Sport 1000 BoX M-7
Ducati Sport 800 BoX M-7
Ducati ST4 S-ABS BoX M-7
Ducati Super Sport 800 BoX M-7
Ducati Super Sport 1000 BoX M-7
MV Agusta Brutale 750 BoX M-7
MV Agusta Brutale 910 BoX M-7
MV Agusta F4 1000 10- BoX M-7
MV Agusta F4 1000 R BoX M-7
MV Agusta F4 750 BoX M-7
MV Agusta F4 CC 1078 BoX M-7

Package Including:

1pc x NitroData Chip Tuning Box M7

Price:$39.99 Special Price:$29.99