Wellon Programmer VP-290 VP290

Highlights:
1. Supports Languages: English,Korean,Poland,Italian,Portuguese and Dutch ,Chinese(Simplified),Chinese(Traditional),
2. Supports WindowsXP/Vista/ Windows 7 (32bit and 64bit)
3. Not need exterior adapter for mostly devices

Descriptions:

Electrical spec. of the AC adapter:
AC input 100V to 240V, 50/60Hz, DC output 9V/0.6A
40 Pin ZIF socket pin-drivers.
Interface with LAPTOP, PC or compatibles through USB port
Accepts standard file formats: JEDEC, INTEL (Extended) HEX, HOLTEK, EMC(.CDS), INTEL HEX16, Motorola S record
Manages 16 and 32-bit word split (Set Programming)
Features Test Vector capability and multiarray fuse map editor
Test TTL/CMOS logic ICs Access Memory devices
Optimum programming for each individual device
Automaticly Identifies the manufacturer and type of E(E)PROMs, Auto identifies TTL/CMOS logic IC
Device insertion and poor-pin-contact check
Support 1.5v Low voltage devices
Auto-run mode starts programming automatically upon detection of chip insertion

Price:$186.99 Special Price:$145.99

Newest 6.0 Version BCM Modules Pin Code Calculator For Nissan Support 20 Digit Code With 1000 Tokens

Top 4 Reasons to Get Nissan Pin Code Calculator:

1. Latest Version: V6.0
2. New BCM Modules Supported
3. Support 20 Digit Code with 1000 Tokens, each time cost 5 tokens, so can calculate total 200 times. (for 4Digit Code Unlimited Times)
4. Support Latest Nissan Cars Till 2013-2014 Year

Supported Models :

Altima Sedan, Altima Coupe, Versa Hatchback, Versa Sedan, Cube, Sentra, Nissan Leaft, Maxima.Z, Z Roadster, GTR, Juke, Rouge, Murano, Murano Cross Cabriolet, Xterra, Pathfinder, Armada, Quest, Frontier, Titan, 370Z, Xtrail, Tiida, Frontier, March, Cima, Fuga, Skyline, Latio, New Teana, New Snny, Patrol, Qashqai, Dualis, Froniter, Navara, Livina, Grand Livina, Bluebird, G Sedan, G Coupe, G Convertible, Infiniti M, Infinity Ex, Infiniti JX, Infiniti QX.

Package Including:

1pc x Nissan/Infiniti Pin Code Calculator USB Dongle
1pc x CD

Price:$165.99 Special Price:$145.99

Hand-held NSPC001 Automatic Pin Code Reader For Nissan

Top 6 Reasons to Get Hand-held NSPC001 Automatic Pin Code Reader For Nissan:

1. Support all Nissan cars that can read BCM code to calculate pin code.
2. Can transfer 5-digit code to 4-digit code, the newest 20-digit code to 20-digit code.
3. No computer is needed, plug and play, automatic transfer.
4. With 100 point built-in tokens.
5. No deduction for 5-digit code to 4-digit code.
6. 1 point will be deducted for each success transfer of new 20-digit code to 20-digit code and successful reading of BCM code.

Notice: When 100 tokens used up, you can still use it to get 4-digit code. But you need buy a new one if you want read new 20-digit pin code.

NSPC001 Automatic Pin Code Reader VS Nissan Pin Code Reader with 1000 Tokens

1. NSPC001 is hand-held, no need install software, can directly use, more convenient.

2. NSPC001 contain 100 tokens, this 100 tokens support newest 20 digit pin code reading, cost 1 token each time. Nissan pin code reader with 1000 tokens support 20 digit pin code reading too, cost 5 tokens each time.

3. When you used up NSPC001 100 tokens, it still able to calculate 4 digit code, which is same as Nissan pin code reader.

NSPC001 Size:

Main Unit (L*W*H): 9*7*3 cm
Cable length: 70cm

Package List:

1 pc x NSPC001 Nissan Automatic Pin Code Reader

Price:$159.99 Special Price:$129.99

Main Cable Of Autoboss V30

Autoboss Main testing cable, can be used for all autoboss v30. If your cable is bad, you can buy from us.

Paking list:

1x Main Cable of Autoboss V30

Price:$22.99 Special Price:$14.99

BENZ 38pin Adapter For VCS Scanner/Autoboss PC MAX/Autoboss V30

Package including:

1pc x BENZ 38pin Adapter Connector
1pc x Connecting Line

Price:$89.99 Special Price:$79.99

CarBrain C168 Scanner

C168 Description:

CarBrain C168 scanner is a wireless automotive fault diagnostic scanner , C168 can be installed on most equipments that have Windows operating system, and it enormously enhances the compatibility between automobile examination and other automobile maintenance equipments.

C168 Functions:

1.Internet online update, users can update software for individual vehicle models of their own choice via Internet
2.Maintenance records management
3.Standard USB port

Construction

1) Chipset: ATMEL Chip
2) Operating system: Windows
3) Dimension of COMBOX:12*8*2.5CM
4) Dimension of RF box: 6*5*2.5CM
5) Testing port 1:Bluetooth wireless
6) Testing port 2:diagnostic cable
7) Power supply of COMBOX:+12
8) Power supply of RF box: USB
9) Mainboard: Anti-electromagnetism industrial control mainboard
10) Communication mode:COM port and Bluetooth wireless

Features

1) Easy to use, compact size, excellent performance, quick response
2) Using Bluetooth wireless technology and based on windows operating system
3) Has a full-range coverage of vehicle types such as BMW, VW/AUDI, Seat, Skoda, Landrover, Citroen, Renault, Fiat, Volvo,Peugeot, Opel, Chrysler, Ford, GM, Obdii/Eobdii Can/OBD injectionsystem, Toyota/Lexus, Honda, Mitsubishi, Nissan, Mazda, Suzuki,Daihatsu, Daewoo and Kia
4) Equipped with CAN adapter to test auto model with CANBUS
5) Display data stream in waveform
6) Perform functions like reading DTC code, erasing DTC code, readingdata stream tests on Engines, AT, ABS, Airbags and other

Price:$349.99 Special Price:$299.99

H-ONDA HDS Cable OBD2 Diagnostic Cable

Supported Languages: English/ Chinese/ Spanish/ French/ Korean/ Portuguese/ Indonesian
Operating System: Windows XP SP3
Update: Via CD

HDS Diagnostic Cable Function:

Supports most 1996 and newer vehicles with OBDII/DLC3 diagnostics
Support Honda HDS OEM diagnostic software
Supports Diagnostics and Active tests
Easy to install and carry
Cost-effective
High performance with ARM chip inside
Status LED

HDS Diagnostic Cable Specification:

1.Construction

Diagnostic Interface:16 PIN
USB Interface: USB 2.0
Power: DC 5 V - 36 V
Consumption: 0.3 W
Dimensions: 76 mmx 43 mm x 19 mmLanguage

2.Supported Protocols

K-Line ISO 9141
KWP 2000 ISO 14230-4
CAN 2.0B ISO 11898
CAN ISO 15765-4

HDS Diagnostic Cable Software Display:

Package List:

1pc x H-ONDA HDS CABLE
1pc x CD driver(with user manual in it)

Price:$24.99 Special Price:$21.99

Nissan Consult-3 plus

Nissan Consult-3 Plus is the newest Nissan diagnostic tool. Nissan Consult-3 Plus diagnosis system is based on a wireless platform provides completed diagnosis and service information.It supports Nissan 2011 MY LEAF Quest and Murano CrossCabriolet, super racing MY GT-R and 2012 of NV and 2012 MY Infiniti M and M Hybrid. From 2011/12, Nissan Consult-3 Plus can support all the models of the Nissan and Infiniti from 1996 up till now, with all Consult II & III functions .
And it can calcaulate the password for the new cars till year 2012 with NISSAN Password.

Nissan Consult-3 plus = Nissan Consult-3 + Nissan Consult-2

Nissan Consult -3 Plus Function:

1. Nissan Consult-3 plus (nissan consult 3+) work for all nissan car , infiniti car and nissan gtr car to 2012.
2. Nissan Consult-3 plus work with obd-16 connector for the new kind of car, work with 14 pin connector for the old kind of car.
3. Nissan Consult-3 plus support nissan car electrolic system diagnostic and programmer function.
4. Nissan Consult-3 plus support nissan electromobiles such as Leaf.
5. Nissan Consult-3 plus support all Renault.

Product Information:
Nissan Consult-3 plus Software Version:
1. Nissan Consult-3 plus software version: V 15.12.00 ;
Nissan Consult-3 plus supports 11 language:
1. Chinese(Simplified);
2. Chinese(Traditional);
3. English;
4. Finnish;
5. French;
6. German;
7. Greek;
8. Italian;
9. Japanese;
10. Russian;
11. Spanish;

Nissan Conslu-3 functions include :

1. Scantool Diagnostics:for all Nissan,Infiniti,GTR and Renault;
2. ECU Reprogramming:for all Nissan,Infiniti,GTR and Renault;
3. Immobi and Smart key:for all Nissan,Infiniti,GTR and Renault;
4. Nissan GTR:for Nissan GTR Diagbostics,Immobi and Reprogramming;
5. Electromobiles car:for Nissan Electromobiles car Diagbostics,Immobi and Reprogramming;

Nissan Consult-3 Communication Mode:
1. USB 2.0;
2. Bluetooth;

Operation Notes: Nissan Consult-3 plus can only work with Windows XP(SP2 or later). It cannot work in VISTA system

Packing list:

1pc* Nissan Consult-3 plus vehicle communication module + OBD-16 Cable
1pc* Nissan 14PIN Line
1pc* USB 2.0 Cable
1pc* Bluetooth
1pc* Power Supply
1pc* Casebox

Nissan Consult-3 Plus is the newest Nissan diagnostic tool. Nissan Consult-3 Plus diagnosis system is based on a wireless platform provides completed diagnosis and service information.It supports Nissan 2011 MY LEAF Quest and Murano CrossCabriolet, super racing MY GT-R and 2012 of NV and 2012 MY Infiniti M and M Hybrid. From 2011/12, Nissan Consult-3 Plus can support all the models of the Nissan and Infiniti from 1996 up till now, with all Consult II & III functions .
And it can calcaulate the password for the new cars till year 2012 with NISSAN Password.

Nissan Consult-3 plus

Nissan Consult-3 plus = Nissan Consult-3 + Nissan Consult-2

Nissan Consult -3 Plus Function:

1. Nissan Consult-3 plus (nissan consult 3+) work for all nissan car , infiniti car and nissan gtr car to 2012.
2. Nissan Consult-3 plus work with obd-16 connector for the new kind of car, work with 14 pin connector for the old kind of car.
3. Nissan Consult-3 plus support nissan car electrolic system diagnostic and programmer function.
4. Nissan Consult-3 plus support nissan electromobiles such as Leaf.
5. Nissan Consult-3 plus support all Renault.

Product Information:
Nissan Consult-3 plus Software Version:
1. Nissan Consult-3 plus software version: V 15.12.00 ;
Nissan Consult-3 plus supports 11 language:
1. Chinese(Simplified);
2. Chinese(Traditional);
3. English;
4. Finnish;
5. French;
6. German;
7. Greek;
8. Italian;
9. Japanese;
10. Russian;
11. Spanish;

Nissan Conslu-3 functions include :

1. Scantool Diagnostics:for all Nissan,Infiniti,GTR and Renault;
2. ECU Reprogramming:for all Nissan,Infiniti,GTR and Renault;
3. Immobi and Smart key:for all Nissan,Infiniti,GTR and Renault;
4. Nissan GTR:for Nissan GTR Diagbostics,Immobi and Reprogramming;
5. Electromobiles car:for Nissan Electromobiles car Diagbostics,Immobi and Reprogramming;

Nissan Consult-3 Communication Mode:
1. USB 2.0;
2. Bluetooth;

Operation Notes: Nissan Consult-3 plus can only work with Windows XP(SP2 or later). It cannot work in VISTA system

Packing list:

1pc* Nissan Consult-3 plus vehicle communication module + OBD-16 Cable
1pc* Nissan 14PIN Line
1pc* USB 2.0 Cable
1pc* Bluetooth
1pc* Power Supply
1pc* Casebox

Price:$1,386.99 Special Price:$1,345.99

V3.015.20 Newest Version Honda HDS HIM Diagnostic Tool with Double Board

Top 6 Reasons To Get Honda HDS
1. Software Version: 3.015.20 This Version Need Activation, If You Don't Buy Device from Us, Activation Cost 5usd.
2. Support VIN Reader and IMMO.
3. Test Coverage: Dynamical, Body, Chassis, ABS, SRS, Anti-theft, etc.
4. Honda HDS HIM supports CAN BUS system, and it can re-program the Auto ECU. This HIM is based on PC operation platform.
5. Use Z-TEK USB1.1 to RS232 Convert Connector together, It is easy to use Honda HDS on the computer that without COM port
6. Support Honda vehicles from 1992-2014.11 year

Notice: Operate system: XP
3.015.20 Software Free Download

Honda HDS HIM Function
1. Functions Supported by Honda/Acura Protocols

Reading and decoding fault codes from control blocks memory
Deleting fault codes
Displays system current parameters in digital form
Combined displaying of data
Management of executive devices
Logs keeping - writing and keeping of digital parameters in memory
Special functions - changing of permissible settings of blocks, programming etc.

2. Functions Supported by OBD-II Protocols

Mode $01 - Displays system current parameters in digital form (up to 8 parameters at once)
Mode $02 - Displays parameters of freeze frame
Mode $03 - Reading and decoding of fault codes from control block? memory
Mode $04 - Deleting of fault codes (memory clearing)
Mode $05 - Displays results of oxygen sensors
Mode $06 - Displays results of changeably controlled systems and components
Mode $07 - Displays results of constantly controlled systems and components
Mode $08 - Management of executive devices
Mode $09 - Displays car identification info

Honda HDS HIM Package List
1 x HIM with OBD II Cable
1 x 3 Pin Cable
1 x RS232 Cable
2 x Self test Adapter
1 x AC Adapter
1x Z-TEK USB1.1 To RS232 Convert Connector

Price:$109.00 Special Price:$98.00

This card is not registered, recoverable nor refundable if lost and if not replace except for quarlity problem. All right reserved by SPX.

Price:$319.00 Special Price:$265.00

Difference between GM tech 2 serials and GM MDI

Content GM Tech 2 SP23, SP23-B, SP23-B3, SP23-C GM MDI SP163
Language GM-English, German, Spanish , Japanese, French, Thai , Portuguese, Korean
GM Tech2 GM Diagnostic Scanner

Top 4 Reasons to Get GM Tech2 Scanner:

1. Multi-langauge: English, Italian, French, Portuguese, German, Spainish, Korean, Japanese, Thai, Chinese
2. Update: via 32MB Software Card, when there is newer version, you can just buy new card to update
3. Support Car Models: GM, SAAB, Opel, Suzuki, Isuzu, Holden
4. Year Coverage of Diagnosis: From 1992 to 2013, With Help of Tis2000 Software, It Can Do Programming for Cars Before Year 2007

Notice:
1. It Can Only Support GM Cars, No Trucks
2. One Device Has One 32MB Card As Default, If You Want More, Please Buy Additional 32MB Memory Card
3. Customer may get confused which GM TECH2 to choose, as we have 5 different kinds on sale, to make it clear
If you want GM Tech2 with carton box to save shipping cost, please try this Carton Package Tech2 Diagnostic Tool for GM
For the rest 4 kinds, just from different factory, functions and packages are all the same, normally the one with higher price quality is better too.

Software Version:

GM English 32.007
SAAB English 148
OPEL English 165(Support Cars from 1997-2014)
Holden English 149(Support Cars from 1999-2013)
SUZUKI English 01.210.020
ISUZU English K line 11.53
CAN line 107.021

Vetronix GM Tech 2 Specifications

1.Dimensions: 12
2.Microprocessor: 32 bit,16 MHz
3.Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
4.Communications: Integral RS232 communication port.
5.Screen: 3.8.8 backlit monochrome with full graphics capability: 320,40 pixels. Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 MB)

GM Tech2 Features

1) Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
2) Support for on-board diagnostics on all GM systems 1992 thru current year.
3) Removable hardware modules provide insurance against scan tool obsolescence.
4) Large, easy-to-read backlit screen.
5) RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6) Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7) Ability to view the status of vehicle diagnostic tests as they run.
8) Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.

An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.

The Following GM Vehicles Utilize The CAN Interface

05 Buick Allure (3.6L)
05 Buick LaCrosse (3.6L)
05 Buick Rainier (5.3L)
04-05 Buick Rendezvous (3.6L)
04-05 Cadillac CTS (3.6L)
04-05 Cadillac SRX (3.6L / 4.6L)
04-05 Cadillac XLR (4.6L)
05 Cadillac STS (3.6L / 4.6L)
05 Chevrolet Cobalt (2.2L)
05 Chevrolet Corvette (6.0L)
05 Chevrolet Equinox (3.4L)
05 Chevrolet TrailBlazer (5.3L)
05 Chevrolet SSR (6.0L)
04 Chevrolet Malibu (Body/Chassis only)
05 Chevrolet Malibu (3.5L)
05 GMC Envoy (5.3L)
05 Pontiac G6 (3.5L)
05 Pontiac GTO (6.0L)
05 Pontiac Pursuit (2.2L)

GM Tech2 Package List:

Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANDI) and instruction sheet download (199.2 KB)
RS232 cable and user manual
RS232-DB9 adapter
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/19 Adapter
NAO 12/19 Adapter
Battery Power Cable
Storage Case
TIS 2000 CD

Price:$369.00 Special Price:$349.00

VAS5054A PLUS (BT without OKI)

VAS 5054 PLUS ( ODIS V2.02 / Bluetooth Support / UDS Protocol )

5 Reasons for VAS 5054 Plus :
1. With Bluetooth
2. Support UDS Protocol
3. Multi-languages:
English/Japanese/Portuguese/Romanian/Korean/Dutch/Polish/Turkish/Spanish/French/Italian/Croatian/Danish/German/Swedish/Finnish/Slovenian/Czech/Russian/Greek/Chinese
4. Supported Car Models: for VW, for A-UDI, for SKODA, for SEAT Bentley and Lamborghini
5. Bluetooth Version (Bluetooth Connection Password: 082145725)

The VAS 5054 PLUS is a universal diagnostic interface for the vehicles of the Volkswagen Group and all OBD vehicle systems from other manufacturers.
The integrated Bluetooth interface connects the vehicle with a notebook, desktop PC or test system.
No cables are needed for vehicle diagnostics using the VAS 5054 PLUS
The range of the wireless Bluetooth connection is 2 to 5 meters,depending on the environment and the type of Bluetooth adapter used on the PC side.
The Serial Port Profile (SPP) is used for data transfer via Bluetooth. Different Bluetooth security levels are supported.

The vehicle protocols are handled directly in the VAS 5054 PLUS

This ensures fast response times and a reliable real-time behavior independently of the PC operating system.
Every time a connection is established, the VAS 5054 PLUS software is identified with the version installed on the application PC.
The VAS 5054A thus automatically adopts any new features provided after a new software version has been installed on the application PC.

The diagnostic application and the associated Diagnostic Base System are installed on the application PC.
The diagnostic base system can access the VAS 5054 PLUS via Bluetooth or USB.

Access Via Bluetooth: After a connection to the VAS 5054 PLUS has been set up,
the Bluetooth software provides a virtual serial COM port (Bluetooth Serial Port Profile).
The Diagnostic Base System uses this COM port to communicate with the VAS 5054A.You need to specify this port when you install the diagnostic application

Access Via USB: You can also connect the VAS 5
054A to the application PC by using the supplied USB cable.
Windows detects the VAS 5054 PLUS through Plug and Play, and automatically installs the drivers copied when you installed the diagnostic application.
Setup of the VAS 5054 PLUS is then complete and the device is ready for use by the diagnostic application.

The Following Vehicle Bus Systems are Supported:
K line (ISO9141-2)
High-speed CAN (ISO 11898-2)
Low-speed CAN (ISO 11898-3)
J1850 (SAE J1850)
UDS Protocol
PWM Protocol

ODIS V2.02 Computer Windows System Requirements
Windows System Language: American English
Windows XP(xp2/xp3)
System C:// have to be NTFS format
C:// need to have at least 40GB space for installing ODIS V2.0

Packing list :
VAS 5054 PLUS Main Unit
USB Cable (3 meter)
ODIS 2.02 Software (3 CD)

Price:$90.99 Special Price:$86.99

Main Cable Of Autoboss V30

Autoboss Main testing cable, can be used for all autoboss v30. If your cable is bad, you can buy from us.

Paking list:

1x Main Cable of Autoboss V30

Price:$16.99 Special Price:$14.99

New VAS 5054 PLUS without Bluetooth Version without OKI Chip.

Carton Packing
Note: Because this vas5054 plus without oki chip, so UDS protocol not supported.
if you want to support UDS protocol,please buy VAS5054 PLUS with OKI Chip from our store.

Features:
-Support Multi-Language: English/Japanese/Portuguese/Romanian/Korean/Dutch/Polish/Turkish/Spanish/French
/Italian/Croatian/Danish/German/Swedish/Finnish/Slovenian/Czech/Russian/Greek/Chinese

Details:
The VAS 5054 PLUS is a universal diagnostic interface for the vehicles of the Volkswagen Group and all OBD vehicle systems
from other manufacturers.
No cables are needed for vehicle diagnostics using the VAS 5054 PLUS
used on the PC side.
The vehicle protocols are handled directly in the VAS 5054 PLUS
This ensures fast response times and a reliable real-time behavior independently of the PC operating system.
Every time a connection is established, the VAS 5054 PLUS software is identified with the version installed on the application PC.
The VAS 5054A thus automatically adopts any new features provided after a new software version has been installed on the application PC.
The diagnostic application and the associated Diagnostic Base System are installed on the application PC.

The diagnostic base system can access the VAS 5054 PLUS via USB.
Access Via USB: You can also connect the VAS 5054A to the application PC by using the supplied USB cable.
Windows detects the VAS 5054 PLUS through Plug and Play, and automatically installs the drivers copied when you installed the diagnostic application.
Setup of the VAS 5054 PLUS is then complete and the device is ready for use by the diagnostic application.

The Following Vehicle Bus Systems are Supported:
K line (ISO9141-2)
High-speed CAN (ISO 11898-2)
Low-speed CAN (ISO 11898-3)
J1850 (SAE J1850)
PWM Protocol

ODIS V2.02 Computer Windows System Requirements
Windows System Language: American English
Windows XP(xp2/xp3)
System C:// have to be NTFS format
C:// need to have at least 40GB space for installing ODIS V2.0

Packing list :
VAS 5054 PLUS Main Unit
USB Cable (3 meter)
Software CD
weight : 0.50kg
box size : 24x17x5 cm

Price:$95.99 Special Price:$85.99

Cheapest VAS 5054A Bluetooth Scanner For VW/AUDI/SKODA/SEAT With OKI Chip

Top 6 Reasons To Get VAS5054A:

1. Cheapest Price
2. Software Version: ODIS V2.0
3. With OKI Chip
4. Multi-languages:English/Japanese/Portuguese/Romanian/Korean/Dutch/Polish/Turkish/Spanish/French/Italian/Croatian/
Danish/German/Swedish/Finnish/Slovenian/Czech/Russian/Greek/Chinese
5. Supported Car Models: VW, AUDI, SKODA, SEAT, Bentley and Lamborghini
6. Bluetooth Version
7. Update By CD

Note:
If you want the software for Bentley and Lamborghini, please leave us the information when order. Lamborghini V19 software free download

VAS 5054A Software Installation Computer Windows System Requirements:

Windows System Language: American English
Windows XP(sp2/sp3)
System C:// have to be NTFS format
C:// need to have at least 10GB space for installing VAS5054A

Bluetooth version

The VAS 5054A is a universal diagnostic interface for the vehicles of the Volkswagen Group and all OBD vehicle systems from other manufacturers.
The integrated Bluetooth interface connects the vehicle with a notebook, desktop PC or test system.
No cables are needed for vehicle diagnostics using the VAS 5054A.
The range of the wireless Bluetooth connection is 5 to 10 meters,depending on the environment and the type of Bluetooth adapter used on the PC side.
The Serial Port Profile (SPP) is used for data transfer via Bluetooth. Different Bluetooth security levels are supported.

Specification:

The vehicle protocols are handled directly in the VAS 5054A.
This ensures fast response times and a reliable real-time behavior independently of the PC operating system. Every time a connection is established, the VAS 5054A software is identified with the version installed on the application PC. The VAS 5054A thus automatically adopts any new features provided after a new software version has been installed on the application PC.
The diagnostic application and the associated Diagnostic Base System are installed on the application PC.
The diagnostic base system can access the VAS 5054A via Bluetooth or USB.

Access via Bluetooth: After a connection to the VAS 5054A has been set up, the Bluetooth software provides a virtual serial COM port (Bluetooth Serial Port Profile). The Diagnostic Base System uses this COM port to communicate with the VAS 5054A.You need to specify this port when you install the diagnostic application.

Access via USB: You can also connect the VAS 5054A to the application PC by using the supplied USB cable. Windows detects the VAS 5054A through Plug and Play, and automatically installs the drivers copied when you installed the diagnostic application. Setup of the VAS 5054A is then complete and the device is ready for use by the diagnostic application.

VAS 5054A Supported Protocol:

K line (ISO9141-2)
High-speed CAN (ISO 11898-2)
Low-speed CAN (ISO 11898-3)
J1850 (SAE J1850)
UDS Protocol
PWM Protocol

Cheapest VAS 5054A PCB Board:

Price:$65.99 Special Price:$62.00

OBD Connector of Autoboss V30

Autoboss OBD Connector, can be used for all autoboss v30. If your cable is bad, you can buy from us.

Packing list:

1x OBD Connector of Autoboss V30

Price:$18.99 Special Price:$9.99

Main Test Cable for GM TECH2

Used together with GM TECH2, can not works alone. It used to connect GM TECH2 with car for diagnose.

Package including:

1pc x Main test cable for GM TECH2

Price:$19.99 Special Price:$14.99

Scanner for Fiat 

1. Language: English
2. Can't Be Update
3. Support System: Windows XP
4. Vehicles Coverage: Fiat Car Before 2010

Description: 

The Fiat Scanner is equipped with LEDs indicating TX and RX. The device is designed for each car owner and small and medium-sized garages. The device is professionally designed but very easy to use.

Supported Operating Systems:
1. Engine
2. ABS
3. AIRBAG

Support Car Models:

Price:$22.99 Special Price:$18.99

Price:$19.99 Special Price:$14.99

Super Volvo Dice Pro+ Volvo Diagnostic Communication Equipment

Top 3 Reasons To Get Super Volvo Dice Pro:

1. Software Version: 2014D
2. Update: By CD
3. Supported Languages: English, Spanish, French, Swedish, Portuguese, Chinese

Notice:

1. Can Not Support Cars Before the Year 1999
2. Support Win7 System Only
3. Only Used to do Diagnosis, no Programming

Super Volvo Dice Pro+ Description:

Volvo Dice PRO+ is the newest Volvo car scanner which is used together with VIDA all-in-one to communicate with the vehicle.
Communication makes diagnosing and troubleshooting the vehicle possible, as well as downloading software.

In order to facilitate the maintenance convenience, when the car DiCE Pro provides a holster and handle, can effectively protect the equipment, the user can be hung on the equipment or his belt. In equipment positive four lamp, it will tell whether good user equipment work in equipment, the operating instructions on the tools back.

Super Volvo Dice Pro+ Features:

1. VOLVO Dice Pro is assigned Volvo OEM scanner,It provid orignal trouble diagnostic, orignal work information system , DiCE Pro selftest , DiCE Pro automatic upgread by newer software version and alone SQL Server database.
2. VOLVO Dice Pro has all set function to support workshop,It can do volvo cars form 1999 to now.(according VIDA version)
3. VOLVO Dice Pro automatic scan the veichle infomation by itself ,example Vin number / Engine Num / AT Number.....
4. VOLVO Dice Pro can do read DTC,How to repair DTC,Read Datastream,Actuation,Programming/coding.

Super Volvo Dice Pro+ Supported Protocol:

The Volvo cars has a lot of protocol,such as K-Line,CanBus,Single CanBus,Manufacture K+Double CanBus and K+Single CanBus.These protocols is improved in the auto delopment. Dice Pro supports all protocols of Volvo.

Super Volvo Dice Pro+ Package List:

1pc x Dice Pro Device
1pc x OBD-II Cable
1pc x USB A to MINI USB Angled Cable
1pc x Dice Pro Plastic Case
1pc x DVD with VIDA 2014D

FAQ:

Q1: Can it program remote keys?
A1: It can only used to diagnosis, can not do programming.

Q2: Can the Super Volvo Vida Dice cancel DPF and Turbo failure? Reprogram cluster?
A2: It can cancel the DPF and Turbo failure information which it read; it can only support diagnosis, do not support programming

Q3: Does this Volvo Dice support Bluetooth?
A3: No, it do not have Bluetooth

Q4: What's the difference between two Super Volvo Vida Dice?
A4: These two Super Volvo Vida Dice have complete same function, just difference color, SP170 is blue, SP170-B is Silver Color

Price:$109.00 Special Price:$99.00