Professional Diagnostic Scanner VCM II For LandRover V143

1.What does the VCM2 for Land Rover do?
The VCM2 for Land Roverconnects directly to the vehicle OBDII (diagnostic) connector and then to a laptop via a
USB cable for use with SDD.  Once the J2534 DLL filesare loaded, this product will allow normal operation with the
JLR SDD diagnostic tool.  
The device is designed as a replacement pass-through vehicle communications device that can be used for the majority of the JLR SDD diagnostic applications.  
Only SCP communications are not possible with this device.
 
2.How does the VCM2 for Land Rover operate in J2534 mode?
The VCM2 for Land Rover device is simple and easy to use.
l Download the latest J2534 DLL software files from the Diagnostic Associates web site www.diagnostic-associates.com/download and install these on the SDD laptop.
l Connect the J2534 device to the vehicle OBDII connector (the device powers from the vehicle).
l Connect the 12ft USB cable to the J2534 device and the other end to the SDD laptop.
l The red vehicle power (PWR) LED will illuminate to show that the device is powered.
l During communication with the vehicle the status (STS) LED will flash green.
l The device interacts with the SDD diagnostic tool in the same way as the existing VCM.

VCM2 for Land Rover
Overview
u JLR Approved device
u Replacement for JLR SDD VCM
u Covers CAN, & ISO9141 vehicle networks
u Most cost effective for Land Rover pass-thru

(Yes) – Vehicle line fully supported: 
(Yes*) - Vehicle line fully supported apart from viewing Data logger signals from both ECM and TCM
modules simultaneously on 2006MY variants : 
(No) - Vehicle Line Not supported
 
VCI device
u Best suited for current and future vehicles 
u 12ft USB cable as standard included
u Easy to update for J2534 new functionality

* VCM2 interface ×1
* OBD2 cable ×1
* USB cable ×1
* CD-DVD x1
* Plastic box ×1

Price:$199.00 Special Price:$125.00